Harvey Tool 0.0100" Cutter DIA x 0.0500" Length of Cut x 0.1000" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0100" Cutter DIA x 0.0500" Length of Cut x 0.1000" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0150" (1/64) Cutter DIA x 0.0750" Length of Cut x 0.1500" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0150" (1/64) Cutter DIA x 0.0750" Length of Cut x 0.1500" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0250" Cutter DIA x 0.1250" (1/8) Length of Cut x 0.2500" (1/4) Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0250" Cutter DIA x 0.1250" (1/8) Length of Cut x 0.2500" (1/4) Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0550" Cutter DIA x 0.3850" Length of Cut x 0.7700" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0550" Cutter DIA x 0.3850" Length of Cut x 0.7700" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.1875" (3/16) Cutter DIA x 1.1250" (1-1/8) Length of Cut x 1.6250" (1-5/8) Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.1875" (3/16) Cutter DIA x 1.1250" (1-1/8) Length of Cut x 1.6250" (1-5/8) Reach Carbide Square End Mill, 3 Flutes
Core Cutter 1/4" Diameter x 1/4" Shank Diameter x 3/8" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/4" Diameter x 1/4" Shank Diameter x 3/8" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/4" Diameter x 1/4" Shank Diameter x 3/8" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/4" Diameter x 1/4" Shank Diameter x 3/8" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 3/8" Diameter x 3/8" Shank Diameter x 9/16" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 3/8" Diameter x 3/8" Shank Diameter x 9/16" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 3/8" Diameter x 3/8" Shank Diameter x 9/16" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 3/8" Diameter x 3/8" Shank Diameter x 9/16" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 3" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 3" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 3" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 3" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 5" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 5" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 5" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 5" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 6" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 6" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 6" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/2" Diameter x 1/2" Shank Diameter x 3/4" LOC x 6" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 5/8" Diameter x 5/8" Shank Diameter x 0.9375" LOC x 5" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 5/8" Diameter x 5/8" Shank Diameter x 0.9375" LOC x 5" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 5/8" Diameter x 5/8" Shank Diameter x 0.9375" LOC x 5" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 5/8" Diameter x 5/8" Shank Diameter x 0.9375" LOC x 5" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 4" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 4" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 6" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 6" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 6" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 3/4" Diameter x 3/4" Shank Diameter x 1.125" LOC x 6" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 5" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 5" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 5" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 5" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 6" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 6" OAL x 2 Flute SQ Uncoated for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 6" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1" Diameter x 1" Shank Diameter x 1-1/2" LOC x 6" OAL x 2 Flute SQ Hard Carbon for Aluminum & Plastics
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 3 Flute x 1-1/4" Neck x Square Corner Hard Carbon End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 3 Flute x 1-1/4" Neck x Square Corner Hard Carbon End Mill for Aluminum
Harvey Tool 0.0100" Cutter DIA x 0.0150" (1/64) Length of Cut x 0.0800" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0100" Cutter DIA x 0.0150" (1/64) Length of Cut x 0.0800" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0140" Cutter DIA x 0.0210" Length of Cut x 0.1120" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0140" Cutter DIA x 0.0210" Length of Cut x 0.1120" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0180" Cutter DIA x 0.0270" Length of Cut x 0.1440" Reach Carbide Square End Mill, 3 Flutes
Harvey Tool 0.0180" Cutter DIA x 0.0270" Length of Cut x 0.1440" Reach Carbide Square End Mill, 3 Flutes
3500500N225 HITCARB 1/2" Diameter x 1/2" LOC x 2-1/4" Neck Length x 4" OAL x 3 Flute Square Uncoated End Mill for Aluminum & Plastics
3500500N225 HITCARB 1/2" Diameter x 1/2" LOC x 2-1/4" Neck Length x 4" OAL x 3 Flute Square Uncoated End Mill for Aluminum & Plastics
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 4 Flute x 1-1/4" Neck x Square Corner Latuma End Mill for Steel/Stainless/Exotics
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 4 Flute x 1-1/4" Neck x Square Corner Latuma End Mill for Steel/Stainless/Exotics
Core Cutter 3/8" Diameter x 5/8" LOC x 4" OAL x 4 Flute x 2" Neck x Square Corner Latuma End Mill for Steel/Stainless/Exotics
Core Cutter 3/8" Diameter x 5/8" LOC x 4" OAL x 4 Flute x 2" Neck x Square Corner Latuma End Mill for Steel/Stainless/Exotics
40573 1/4 x 1/4 x 3/8 x 2-1/4 4 N.220 3 FLUTE 37 DEGREE HELIX EXTENDED NECK ALU-POWER
40573 1/4 x 1/4 x 3/8 x 2-1/4 4 N.220 3 FLUTE 37 DEGREE HELIX EXTENDED NECK ALU-POWER
HITCARB 1/2" Diameter x 1/2" LOC x 2-1/4" Neck Length x 4" OAL x 4 Flute Square Corner Variable Pitch ALTIN Coated HP End Mill. High Performance with Stonger Core and Polished Flutes
HITCARB 1/2" Diameter x 1/2" LOC x 2-1/4" Neck Length x 4" OAL x 4 Flute Square Corner Variable Pitch ALTIN Coated HP End Mill. High Performance with Stonger Core and Polished Flutes
Core Cutter 3/16" Diameter x 1.250" LOC x 2.500" OAL x 2 Flute x 1/2" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1.250" LOC x 2.500" OAL x 2 Flute x 1/2" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 2.500" OAL x 2 Flute x 1/2" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 2.500" OAL x 2 Flute x 1/2" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 3/4" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 3/4" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 3/4" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 3/4" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 3/16" Diameter x 1/4" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 2.500" OAL x 2 Flute x 3/4" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 2.500" OAL x 2 Flute x 3/4" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 2.500" OAL x 2 Flute x 3/4" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 2.500" OAL x 2 Flute x 3/4" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 3" OAL x 2 Flute x 1" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 2 Flute x 1.500" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 2 Flute x 1.500" Neck Length Square Corner Uncoated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 2 Flute x 1.500" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum
Core Cutter 1/4" Diameter x 3/8" LOC x 4" OAL x 2 Flute x 1.500" Neck Length Square Corner Hard Carbon Coated Variable Pitch High Performance End Mill for Aluminum