Use a Steel Boring Bar if you are reaching less than 4X Length to Diameter.  Use a Carbide Boring Bar is you are reaching between 4X to 8X Length to Diameter or if finish is critical. Also, if you have Coolant Thru use it whenever possible. Use Filters on Left to Narrow Down Boring Bar that is the Best Fit for Your Application.
A04G SCLDL1.5-172
A04G SCLDL1.5-172 $ 65.84

Steel .250" x 3.5" Boring Bar .312" Min Bore to hold a Positive CDGW 1.510 at -5° Lead (Left Hand) No Flat Coolant Thru. Factory Stock (MI)

+ Quick Shop

A04G SCLDR1.5-172
A04G SCLDR1.5-172 $ 65.84

Steel .250" x 3.5" Boring Bar .312" Min Bore to hold a Positive CDGW 1.510 at -5° Lead (Right Hand) No Flat No Coolant. Factory Stock (MI)

+ Quick Shop

A04G STUCL1.2-172
A04G STUCL1.2-172 $ 65.84

Steel .250" x 3.5" Boring Bar .312" Min Bore to hold a Positive TCMT 1.21.20.5 at -3° Lead (Left Hand) No Flat Coolant Thru. Factory Stock (MI)

+ Quick Shop

A04G STUCR1.2-172
A04G STUCR1.2-172 $ 65.84

Steel .250" x 3.5" Boring Bar .312" Min Bore to hold a Positive TCMT 1.21.20.5 at -3° Lead (Right Hand) No Flat Coolant Thru. Factory Stock (MI)

+ Quick Shop

A05G SCLPL1.8-219
A05G SCLPL1.8-219 $ 65.84

Steel .312" x 3.5" Boring Bar .395" Min Bore to hold a Positive CPMT 1.81.20.5 at -5° Lead (Left Hand) No Flat Coolant Thru. Factory Stock (MI)

+ Quick Shop

A05G SCLPR1.8-219
A05G SCLPR1.8-219 $ 65.84

Steel .312" x 3.5" Boring Bar .395" Min Bore to hold a Positive CPMT 1.81.20.5 at -5° Lead (Right Hand) No Flat No Coolant. Factory Stock (MI)

+ Quick Shop

A05G STUCL1.2-219
A05G STUCL1.2-219 $ 65.84

Steel .312" x 3.5" Boring Bar .395" Min Bore to hold a Positive TCMT 1.21.20.5 at -3° Lead (Left Hand) No Flat Coolant Thru. Factory Stock (MI)

+ Quick Shop

A05G STUCR1.2-219
A05G STUCR1.2-219 $ 65.84

Steel .312" x 3.5" Boring Bar .395" Min Bore to hold a Positive TCMT 1.21.20.5 at -3° Lead (Right Hand) No Flat Coolant Thru. Factory Stock (MI)

+ Quick Shop




A06J SDXCL2
A06J SDXCL2 $ 85.00

A06J SDXCL2 Back Boring Steel Coolant Thru .585" Min Bore x 3/8" Shank x 4.5" OAL LH Boring Bar for DCMT21.5_ Inserts with .1875" Offset

+ Quick Shop
A06J SDXCR2
A06J SDXCR2 $ 85.00

A06J SDXCR2 Back Boring Steel Coolant Thru .585" Min Bore x 3/8" Shank x 4.5" OAL RH Boring Bar for DCMT21.5_ Inserts with .1875" Offset

+ Quick Shop




A06K SDUCL2
A06K SDUCL2 $ 85.00

A06K SDUCL2 Standard Lead Steel Coolant Thru .585" Min Bore x 3/8" Shank x 5" OAL LH Boring Bar for DCMT21.5_ Inserts with .1875" Offset

+ Quick Shop

1 2 3 72 Next »